Tested in real production
We developed and tested it on our own large-format printers, printing every day.
Sr. Pegante is the large-format 3D printing adhesive developed by experts who print 24/7. While the bed is hot, your part stays firmly stuck down. When it cools, the magic happens: it releases super easily — in many cases, on its own.
We'll take you to the official Sr. Pegante site to complete your purchase.
The same property that makes it reliable during printing is what saves you time at the end.
With the bed hot, the part stays firmly adhered throughout the entire print — no lifting, no warping, no lost parts mid-print.
As the bed cools, the adhesive releases the part. In most cases it comes off effortlessly — sometimes, literally on its own.
We developed and tested it on our own large-format printers, printing every day.
Specifically designed for the big beds and heavy parts where common adhesives fail.
No complicated process: apply, print hot, remove cold. Fewer failures, fewer reprints.
Click to buy Sr. Pegante directly on its official site.
Go to elsrpegante.com → www.elsrpegante.com